uvdtf application instructions
PREE PEEL
Make sure your surface is clean and dust free
Make sure the item your putting the transfer on is straight
APPLY THE TRANSFER
Peel the transfer from the carrier sheet
Apply the transfer straight and slowly
To make sure there are no air bubbles use a squeegee to rub the design
PEEL THE FILM
Start in the corner and slowly peel the film sideways
If any of the design gets stuck on the sheet use the squeegee again
WASH AND CARE
Wait 24 hours before washing
Hand wash only and no scrubbing
dtf application instructions
PREE PRESS
Remove wrinkles and moisture from the fabric with an iron or heat press
Make sure the fabric is flat and smooth
APPLY THE TRANSFER
Place the transfer on the fabric in the desired location
Cover the transfer with parchment paper or Teflon
APPLY THE HEAT
Set the heat press to the 150*c (300*f)
Press the garment for 15 seconds
Leave the garment to cool for 10-20 seconds
Cover the transfer with baking paper or a Teflon
Press again for 10 seconds
WASH AND CARE
Wait 24 hours before washing or stretching the fabric
Wash and tumble dry inside out